10/100/1000-16Gbps switching-Desktop
The DGS-1008D offers an economical way
for SOHO and small to medium businesses (SMB) to benefit from the
increased bandwidth of Gigabit Ethernet. It provides eight Gigabit ports
for fast server deployment to meet increasing network loads.
Think Green
The D-Link 8-Port Gigabit Unmanaged Desktop Switch is part of D-Link’s
new series of SOHO devices that makes use of D-Link’s Green technology,
providing energy savings, reduced heat, and a longer product life
without sacrificing operational performance or functionality. An
efficient power adapter (EnergyStar Level V qualified), minimised use of
harmful substances (RoHS compliant), and recyclable packaging make this
switch truly environmentally friendly.
Conserves Energy
The DGS-1008D helps you conserve energy automatically through several
methods. It features the IEEE802.3az EEE (Energy Efficient Ethernet)
standard which reduces energy consumption by transitioning into a
low-power state during periods of minimal usage without interrupting
your network. The DGS-1008D will also automatically power down ports
that have no link, allowing the switch to save substantial amounts of
power by cutting power usage for unused ports or ports connected to
computers that have been shut down. It can also detect connected cable
lengths, and adjusts power usage accordingly, helping you save energy
without affecting networking performance.
Environmentally Friendly
The 8-Port Gigabit Switch was designed with the environment in mind,
and is compliant with Energy Star Level V, as well as with the stringent
CEC and MEPS regulations that require the use of energy efficient power
adapters. The switch is also built to follow RoHS standards to minimize
use of hazardous materials, and uses recyclable packaging that helps
reduce waste, complying with the WEEE directive.
IEEE 802.1p QoS
QoS prioritizes network traffic so that time-sensitive data is
delivered efficiently, even during bursts of high data traffic. This
helps ensure an optimal experience for streaming media, VoIP calls, and
online gaming.
Cable Diagnostics Function
The D-Link Cable Diagnostics Function enables users to efficiently
detect cable conditions through the LED display on the front-panel.
Users can determine whether the pin connections of their cables’
connectors are correct, facilitating network troubleshooting.
Key Features
- Built-in D-Link Green Technology
- Inexpensive Gigabit solution for Home/SOHO
- Eight 10/100/1000 Mbps Gigabit ports
- 16 Gbps switching fabric
- Auto MDI/MDIX crossover for all ports
- Secure store-and-forward switching scheme
- Full/half-duplex for Ethernet/Fast Ethernet speeds
- IEEE 802.3x Flow Control
- Supports 9,000 Byte Jumbo Frames
- Supports IEEE 802.1p QoS (4 Queues, Strict Mode)
- Supports Cable Diagnostics Function
- RoHS compliant
- Plug-and-play installation
Standards
- IEEE 802.3 10BASE-T Ethernet (twistedpair copper)
- IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
- ANSI/IEEE 802.3 NWay auto-negotiation
- IEEE 802.3x Flow Control
- IEEE 802.1p QoS
- IEEE 802.3az Energy-Efficient Ethernet (EEE)
Protocol
Data Transfer Rates
- Ethernet:
- 10 Mbps (half duplex)
- 20 Mbps (full duplex)
- Fast Ethernet:
- 100 Mbps (half duplex)
- 200 Mbps (full duplex)
- Gigabit Ethernet:
- 2000 Mbps (full duplex)
Topology
Network Cables
- 10BASE-T:
- UTP CAT 3, 4, 5/5e (100 m max.)
- EIA/TIA-586 100-ohm STP (100 m max.)
- 100BASE-TX, 1000BASE-T:
- UTP CAT 5/5e (100 m max.)
- EIA/TIA-568 100-ohm STP (100 m max.)
Media Interface Exchange
- Auto MDI/MDIX adjustment for all ports
LED Indicators
- Per port: Link/Activity/Speed
- Per device: Power
Transmission Method
MAC Address Table
MAC Address Learning
Packet Filtering/Forwarding Rates
- Ethernet: 14,880 pps per port
- Fast Ethernet: 148,800 pps per port
- Gigabit Ethernet: 1,488,000 pps per port
RAM Buffer
DC Input
- External 5 V/1 A Power Adapter
Power Consumption
- Power On (Standby):
- DC input: 0.53 watts
- AC input: 0.77 watts
- Maximum:
- DC input: 3.695 watts
- AC input: 5.14 watts
Heat Dissipation
- Power On (Standby): 2.63 BTU/h
- Maximum: 17.58 BTU/h
MTBF
Operating Temperature
- 0 to 40 ˚C (32 to 104 ˚F)
Storage Temperature
- -10 to 70 ˚C (14 to 158 ˚F)
Operating Humidity
- 10% to 90% RH non-condensing
Storage Humidity
- 5% to 90% RH non-condensing
Device Dimensions (W x D x H)
- 164.5 x 112.4 x 35.0 mm (6.5 x 4.5 x 1.4 inches)
Certifications
- FCC Class B
- ICES-003 Class B
- CE Class B
- C-Tick Class B
- VCCI Class B
- cUL
- LVD